How To Upload Ballistics To The Eliminator 6

How to Upload Ballistics to Your Eliminator® 6

This tutorial explains how to build a custom bullet profile and upload it to your Eliminator 6 using the Burris Connect app. Follow each step to ensure accurate ballistic performance in the field.

STOP — Before You Continue

Make sure you have allowed Bluetooth access for the BurrisConnect app in your phone’s system settings. 

If Bluetooth permissions are disabled, your scope will not connect — even if Bluetooth is turned on.

What You'll Need

• Your Eliminator 6 riflescope
• A smartphone with the Burris Connect app installed
• Bullet data (factory ammo or handload information)
• (Optional) Chronograph data for accurate muzzle velocity

Step 1: Open Burris Connect and Build a Rifle Profile

1. Open the Burris Connect app.
2. Navigate to the Ballistics tab.
3. Select Add New Rifle to create a new rifle profile.
4. Enter your rifle information: name, scope (Eliminator 6), cartridge, sight height, zero distance, and unit preferences.
5. Change the rifle image if desired.
6. Enter optional notes and tap Save.

Step 2: Build a Custom Bullet Profile

1. Select your rifle profile.
2. Tap the + button to add a bullet profile.
3. Choose ammunition from the factory ammo library, bullet library, or manually enter custom data.
4. Verify ballistic details and save the profile.
5. For the best accuracy, measure muzzle velocity using a chronograph and update the value in the app.

Step 3: Set Environmental Conditions

1. Enter environmental information manually or use the Density Altitude tool to auto-fill values using GPS.
2. You can edit these conditions anytime by reopening the bullet profile.

Step 4: Upload Ballistic Data to Your Eliminator 6

1. Turn on your Eliminator 6 scope.
2. In the app, go to the Optics tab.
3. Connect to your scope via Bluetooth.
4. Select your scope, then tap Upload Ballistic Data.
5. Choose the bullet profile you created.
6. Name the ballistic table (optional), review the information, then tap Upload.
7. Wait for the progress bar to complete. Do not power off the scope during upload.

Step 5: Verify the Uploaded Profile on the Scope

1. Hold the Range button on the Eliminator 6 for 5 seconds.
2. The HUD will display the active ballistic profile name for confirmation.

Additional Notes

• The Eliminator 6 stores ballistic data for 16 density altitudes, enabling automatic environmental compensation.
• Manual density altitude adjustments can be made on the scope (covered in other videos).

Learn More

For more help configuring your Eliminator 6, watch the full tutorial series or visit burrisoptics.com .