Veracity (2026)

Burris Veracity® Riflescopes — 2026 New Release (Item Numbers & Full Specifications)

The Burris Veracity® lineup is built for hunters and shooters who demand repeatable performance in the field. Veracity riflescopes feature an improved 5× zoom system, HD glass, multi-coated lenses, and a rugged one-piece aluminum design. Multiple magnification ranges and reticle options (including select illuminated models) make it easy to match the right Veracity to your application.

Below are the complete specification pages and key setup details from the Veracity user guide.

Quick Links

Models & Item Numbers ▶	Specs: 200670 / 200671 / 200680 ▶	Specs: 200681 / 200682 / 200690 ▶
Key Features ▶	Setup & Adjustments ▶	Reticles ▶
What’s Included ▶	BurrisConnect & Custom Knobs ▶	Warranty & Support ▶

Models & Item Numbers

Veracity riflescopes are available in multiple magnification ranges with both rear and front focal plane options and select illuminated models using a CR2032 battery.

Item #	Magnification	Objective	Reticle	Focal Plane	Battery
200670	2.5–12×	42mm	3PW-MOA	Rear Focal Plane	CR2032
200671	2.5–12×	42mm	Fiber Dot Plex	Rear Focal Plane	CR2032
200680	3–15×	44mm	RC-MOA	Front Focal Plane	CR2032
200681	3–15×	44mm	Fiber Dot Plex	Rear Focal Plane	CR2032
200682	3–15×	44mm	Plex	Rear Focal Plane	N/A
200690	5–25×	50mm	RCT-MOA	Front Focal Plane	CR2032

Back to Top;

Full Specifications — Item # 200670 /  200671 /  200680

Spec	200670	200671	200680
Magnification	2.5–12×	2.5–12×	3–15×
Objective Outer Tube Diameter	49.5 mm	49.5 mm	52 mm
Ocular Diameter	44.25 mm	44.25 mm	44.25 mm
Tube Diameter	30 mm	30 mm	30 mm
Objective Lens Diameter	42 mm	42 mm	44 mm
Field of View (ft @ 100 yds)	low 42 / high 8.5	low 42 / high 8.5	low 34 / high 7
Eye Relief (mm)	low 95 / high 93	low 95 / high 93	low 92.7 / high 92
Eye Relief (in)	low 3.74 / high 3.66	low 3.74 / high 3.66	low 3.65 / high 3.62
Exit Pupil (mm)	low 11.2 / high 3.7	low 11.2 / high 3.7	low 11 / high 3.1
Diopter Setting	+2 to -3	+2 to -3	+2 to -3
Reticle	3PW-MOA	Fiber Dot Plex	RC-MOA
Focal Plane	Rear Focal Plane	Rear Focal Plane	Front Focal Plane
Battery	CR2032	CR2032	CR2032
Length	12.5 in (318 mm)	12.5 in (318 mm)	13 in (330 mm)
Weight	25.2 oz (714 g)	25.2 oz (714 g)	24.7 oz (700 g)
Elevation Click Value	1/4 MOA	1/4 MOA	1/4 MOA
Total Elevation Adjustment Range	95 MOA	95 MOA	77 MOA
Windage Click Value	1/4 MOA	1/4 MOA	1/4 MOA
Total Windage Adjustment Range	95 MOA	95 MOA	77 MOA
Parallax/Focus Range	25 yd to ∞	25 yd to ∞	25 yd to ∞
Operating Temperature	-25°F to +140°F	-25°F to +140°F	-25°F to +140°F
Storage Temperature	-40°F to +160°F	-40°F to +160°F	-40°F to +160°F
Waterproof	IPX7	IPX7	IPX7

Back to Top;

Full Specifications — Item # 200681 /  200682 /  200690

Spec	200681	200682	200690
Magnification	3–15×	3–15×	5–25×
Objective Outer Tube Diameter	52 mm	52 mm	58 mm
Ocular Diameter	44.25 mm	44.25 mm	44.25 mm
Tube Diameter	30 mm	30 mm	30 mm
Objective Lens Diameter	44 mm	44 mm	50 mm
Field of View (ft @ 100 yds)	low 34 / high 7	low 34 / high 7	low 21.25 / high 4.5
Eye Relief (mm)	low 92.7 / high 92	low 92.7 / high 92	low 104.5 / high 92
Eye Relief (in)	low 3.65 / high 3.62	low 3.65 / high 3.62	low 3.65 / high 4.11
Exit Pupil (mm)	low 11 / high 3.1	low 11 / high 3.1	low 9.8 / high 2.7
Diopter Setting	+2 to -3	+2 to -3	+2 to -3
Reticle	Fiber Dot Plex	Plex	RCT-MOA
Focal Plane	Rear Focal Plane	Rear Focal Plane	Front Focal Plane
Battery	CR2032	N/A	CR2032
Length	13 in (330 mm)	13 in (330 mm)	15.25 in (387 mm)
Weight	24.8 oz (703 g)	24.8 oz (703 g)	28.1 oz (797 g)
Elevation Click Value	1/4 MOA	1/4 MOA	1/4 MOA
Total Elevation Adjustment Range	77 MOA	77 MOA	60 MOA
Windage Click Value	1/4 MOA	1/4 MOA	1/4 MOA
Total Windage Adjustment Range	77 MOA	77 MOA	26 MOA
Parallax/Focus Range	25 yd to ∞	25 yd to ∞	25 yd to ∞
Operating Temperature	-25°F to +140°F	-25°F to +140°F	-25°F to +140°F
Storage Temperature	-40°F to +160°F	-40°F to +160°F	-40°F to +160°F
Waterproof	IPX7	IPX7	IPX7

Back to Top;

Key Features (2026 Veracity Lineup)

• Improved 5× Zoom System: Compact design with a versatile magnification range for close-to-long range use.
• High-Performance HD Glass: Excellent brightness and clarity with lasting durability.
• Multi-Coated Lenses: Enhanced low-light performance, better color fidelity, and reduced glare.
• Rugged Design: One-piece aerospace aluminum construction and double-sprung turret systems.
• Reticle Options: From simple Plex to advanced MOA/BDC-style reticles, available in both RFP and FFP models.
• Knob Synergy Turrets: users can easily upgrade to a custom lasered knob or a single turn
  Advanced-Capped knob within minutes.

Back to Top;

Setup & Adjustments (Mounting, Battery, Focus, Turrets)

WARNING: Always confirm your firearm is unloaded before mounting or adjusting your optic.

Mounting

Burris recommends high-quality 30mm rings such as Burris Zee Rings or Signature Rings. Follow the ring/mount manufacturer’s instructions to prevent damage from improper mounting.

Battery (Illuminated Models)

Select Veracity models use a single CR2032 battery. Use a coin to remove the battery cap on the illumination knob (left side), install battery flat side up (+).

Special Note: For long-term storage (over a month), remove the CR2032 battery to help prevent battery drain or leakage.

Illuminated Reticle Adjustment

Illuminated reticles are available on select 2.5–12×, 3–15×, and 5–25× models. Reticle illumination enhances visibility in low-light conditions without overpowering the target image.

Illumination brightness is controlled via the illumination knob, allowing the user to precisely adjust intensity to suit ambient lighting conditions and personal preference. The control features 11 brightness settings, with an “off” position between each setting as well as at both ends of the dial.

Tip: Use the lowest visible illumination setting for current conditions to preserve battery life and maintain optimal contrast.

Eyepiece Focus & Parallax

• Eyepiece focus: Use quick glances while turning the diopter until the reticle is sharp.
• Parallax/focus: Rotate the side knob until the target is sharply focused (or match known distance to index).

Turrets & Zero Stop (Knob Synergy®)

• Elevation: ¼ MOA per click. Clockwise moves impact DOWN, counterclockwise moves impact UP.
• Windage: ¼ MOA per click. Clockwise moves impact LEFT, counterclockwise moves impact RIGHT.
• Zero Click Stop (negative adjustment): Rotate the zero click stop ring to allow additional downward travel while zeroing, then reset after zero is confirmed.

Pro Knob — Resettable Zero Click Stop

;

The Pro Knob is an exposed, target-style elevation knob featuring a resettable mechanical zero click stop. A laser-marked scale allows shooters to track elevation adjustments precisely, making it ideal for users who prefer to dial for distance. Once the scope is properly zeroed, follow the steps below to reset the zero click stop and dial ring. Use the 1.5 mm hex wrench supplied with the scope to loosen the two screws located on top of the knob. Remove the knob cap and dial ring. Use the 1.5 mm hex wrench to loosen the three set screws located on the side of the blue zero click stop ring until they are flush with the outside wall of the ring. Ensure the screws are loose enough to prevent spinning the turret post. Gently rotate the zero click stop ring clockwise until it stops. Retighten the three set screws until firm. Do not overtighten.; You have now successfully reset the zero click stop. Reinstall the dial ring, ensuring the “0” marking aligns with the white reference line on the scope tube. Place the knob cap back onto the turret assembly and reinstall both screws using the 1.5 mm hex wrench. Retighten the two screws until firm. Do not overtighten.

Advanced-Capped Knob — Resettable Zero Click Stop

The Advanced-Capped Knob is a low-profile elevation knob featuring a resettable mechanical zero stop and a laser-marked dial ring for tracking elevation adjustments. The dial ring rotates independently, allowing it to be aligned precisely to “0”. The knob may be left exposed for quick adjustments or capped to prevent accidental movement in the field. Once the scope is properly zeroed, follow the steps below to reset the zero click stop and dial ring. With the dust cap removed, use the 1.5 mm hex wrench supplied with the scope to loosen the two screws located on top of the knob. Remove the knob cap and dial ring. Use the 1.5 mm hex wrench to loosen the three set screws located on the side of the green zero click stop ring until they are flush with the outside wall of the ring.; Ensure the screws are loose enough to avoid accidentally spinning the turret post. Gently rotate the zero click stop ring clockwise until it stops. Retighten the three set screws until firm. Do not overtighten.; You have now successfully reset the zero click stop. Reinstall the dial ring, ensuring the “0” marking is aligned with the white reference line on the scope tube. Place the knob cap back onto the turret assembly and reinstall both screws using the 1.5 mm hex wrench. Retighten the two screws until firm. Do not overtighten.

Standard Windage Knob — Dial Reset Procedure

The Standard Windage Knob is a low-profile, capped windage adjustment knob designed for tool-less adjustments and easy tracking of point-of-impact changes. A laser-marked scale allows shooters to monitor windage corrections accurately while maintaining a compact, snag-free profile.

Once the scope is successfully zeroed, the windage dial can be reset to “0” by following the steps below.

1. Remove the windage dust cap.
2. Using the 1.5 mm hex wrench supplied with the scope, loosen the two set screws located just below the top of the windage knob until they are flush with the outside wall of the turret cap.;
   Ensure the screws are loose enough to avoid accidentally spinning the internal turret post.
3. Gently rotate the windage knob until the “0” marking aligns with the white reference line on the scope tube.
4. Retighten the two set screws until firm. Do not overtighten.

Special Note: If any part of the turret adjustment process feels unclear, Burris has you covered. Both the elevation and windage knobs can be completely removed, allowing adjustments to be made directly to the turret post using a standard coin. This provides a simple, intuitive way to fine-tune your zero before reinstalling the knob—no guesswork, no stress, just a clean and confident return to zero.

 

How To Quickly Bore Sight and Sight In.;

Back to Top;

What’s Included in the Box

• Veracity Riflescope
• User Guide
• Hex Wrench
• CR2032 Battery (Illuminated Models)
• Lens Cloth
• Sunshade
• Lens Caps
• Burris Decal

Note: Knob Synergy kits and custom ballistic knobs are sold separately.

Back to Top;

Reticles & Reticle Mapping (BurrisConnect)

For detailed reticle subtensions and to map your reticle, download the BurrisConnect® app and use the reticle mapping tool.

• Reticle Mapping Tool Example

• 3PW-MOA

• RC-MOA

• RCT-MOA

• Plex

• Fiber Dot Plex

Back to Top;

BurrisConnect® & Custom Knobs

The BurrisConnect® app helps users build DOPE cards, reticle maps, and manage ballistic profiles for confident shots in the field.

Custom Elevation Knobs (Quick Overview)

• Buy a compatible Burris riflescope
• Visit BurrisOptics.com/CustomKnobs
• Enter ballistic data (caliber, velocity, zero, model, environment)
• Order the custom-engraved turret matched to your setup.

Back to Top;

Warranty & Support

Veracity riflescopes are covered by the Burris Signature Warranty. For international warranty claims, customers should work through the dealer/distributor where the product was purchased.

Contact	Details
Customer Service	1-888-440-0244;
Email	[e-mail];
Support Portal	burrisoptics.com/support/customer-service

Back to Top;