Burris Signature LRF® — 10×42 Rangefinding Binoculars
Range: 12–2,600 yd (target dependent) | Magnification: 10× | Battery: 1× CR2 (insert with “−” facing out)
Tech Notes
• Three ranging modes: Auto (strongest signal), Sport (nearest target), Hunt (farthest target through brush).
• Five display layouts: LOS, HOR, LOS+HOR, LOS+ANG, HOR+ANG — brightness levels 1–5.
• Scan Mode: Hold the Power button for continuous updates; display auto-off after ~10 s.
• Class 1 (eye-safe) laser; nitrogen-filled, waterproof & fogproof chassis.
• Three ranging modes: Auto (strongest signal), Sport (nearest target), Hunt (farthest target through brush).
• Five display layouts: LOS, HOR, LOS+HOR, LOS+ANG, HOR+ANG — brightness levels 1–5.
• Scan Mode: Hold the Power button for continuous updates; display auto-off after ~10 s.
• Class 1 (eye-safe) laser; nitrogen-filled, waterproof & fogproof chassis.
1) Itemized Components (Product Map)
| Item # | Component | Function |
|---|---|---|
| 1 | Adjustable Eyecups | Twist up for bare eyes; down for glasses. |
| 2 | Left Diopter Ring | Balances your left eye after center focus is set. |
| 3 | Display Focus Knob | Sharpens the internal OLED display. |
| 4 | Center Focus Knob / Battery | Main focus; houses 1× CR2 (− outward). |
| 5 | Power / Range Button | Tap to range; hold for Scan mode. |
| 6 | Mode Button | Open menu, adjust brightness, change modes. |
| 7 | Tripod Adapter Port | Accepts standard tripod adapter. |
| 8 | Harness Lugs | Connect strap or bino harness. |
| 9 | 42 mm Objectives | HD glass — image quality + laser return strength. |
2) Models & Item Numbers
| Model | Item # | Color |
|---|---|---|
| Signature LRF 10×42 | 300299 | Green / Gray |
3) Quick Start (Focus • Menu • Range)
| Step | What to Do |
|---|---|
| Install Battery | Insert CR2 (− outward) into center focus knob. |
| Set IPD & Eyecups | Align barrels until the circles merge; adjust eyecups. |
| Focus Diopter | Cover left → set center focus. Cover right → adjust diopter. |
| Focus Display | Tap Power and adjust display knob until crisp. |
| Open Menu | Hold Mode ~2s. Power = cycle. Mode = select. |
| Adjust Brightness | Select levels 1–5. |
| Range | Tap Power for single range; hold for Scan mode. |
4) Display & Measurement Options
| Setting | Description |
|---|---|
| Units | Yards or meters. |
| LOS | Line-of-sight distance. |
| HOR | Angle-compensated horizontal distance. |
| LOS + HOR | Displays both distances. |
| LOS + ANG | LOS plus slope angle (°). |
| HOR + ANG | Horizontal distance + angle (°). |
5) Ranging Performance
| Target Type | Typical Range |
|---|---|
| Reflective | Up to ~2,600 yd |
| Non-reflective | Up to ~1,600 yd |
| Deer-sized game | Up to ~1,100 yd |
| Minimum | ~12 yd |
| Accuracy | ±1 yd ≤1000 yd; ±2 yd beyond |
6) Core Specifications
| Spec | Value |
|---|---|
| Magnification | 10× |
| Objective Size | 42 mm |
| FOV @ 100 yd | 334 ft |
| Eye Relief | 16 mm |
| Angle Range | ±70° |
| Diopter Adjustment | ±3.5 |
| Dimensions | 6.0″ × 5.5″ × 2.7″ |
| Weight | 36 oz |
| Operating Temp | 5°F to 131°F |
| Battery Life | ~2000 ranges |
| Laser Class | Class 1 (eye-safe) |
| Water/Fogproof | Nitrogen-filled |
7) Troubleshooting
| Issue | What to Try |
|---|---|
| Won’t Power On | Verify CR2 polarity (− outward); replace battery. |
| Dim Display | Increase brightness; refocus display. |
| No Range Reading | Clean lenses; confirm mode; try larger target; heavy weather may block laser. |
8) Care & Warranty
- Blow or brush grit before wiping lenses. For dried mud, use clean water or lens fluid first.
- Do not disassemble — factory service only.
- Covered by the Burris Signature Warranty™.
User Manual (PDF): Signature LRF® Binocular — Full User Guide
Comments
0 comments
Please sign in to leave a comment.