Sighting In And Programming The Oracle X.

Burris Oracle X Crossbow Scope Setup & Sighting Guide

Oracle X Setup Guide

What’s in the Box?

• Burris Oracle X scope
• Battery and battery cap
• Bluetooth remote with mounting options (zip ties & Velcro)
• Mounting tools (not included)

Step 1: Install the Battery

• Insert the battery with the positive side facing out.
• Ensure the battery is seated properly before continuing.

Battery Cap Tool:
If additional leverage is needed when installing or removing the battery cap, use the Burris Oracle X Battery Cap Installation Tool.

Step 2: Mount the Scope on Your Crossbow

• The mount fits both Weaver and Picatinny style rails.
• Slide the scope forward or backward to find the ideal position for comfortable eye relief.

If more forward adjustment is needed:

• Loosen the screws on the clamps and remove them.
• Reposition the clamps from the forward holes to the rear holes to push the scope forward.

Final mounting:

• Tighten the screws to secure the scope, ensuring the recoil lug contacts the mount.
• Torque the screws to at least 40 inch-pounds for stability.

Step 3: Mount the Bluetooth Remote

• Use the supplied Velcro or zip ties to attach the remote to your crossbow.
• Position it for easy access with minimal hand or finger movement.
• For some crossbows, the handguard is an ideal location for mounting the remote.

Note:
If you need to repair or pair the Bluetooth remote to your Oracle X scope, please follow the official pairing guide here: Oracle X Remote Pairing Quick Guide (PDF).

Step 4: Sight In the Scope

Initial Zero at 20 Yards

• Use the mount adjustments to align the center crosshair at 20 yards.
• It is recommended to start by shooting a couple of bolts at 10 yards to confirm hitting the target.
• Shoot 3 arrows at 20 yards with the scope at factory settings.
• Observe the group and note if adjustments are needed (windage and elevation).

Adjusting the Mount

• Loosen the windage and elevation lock screws on the mount.
• Each tick mark equals a ¼ inch movement at 20 yards.
• Adjust according to where your arrows are grouping.
• Tighten the lock screws after each adjustment before shooting again.

Step 5: True Your Ballistic Curve

The Oracle X comes pre-loaded with a basic ballistic curve. You will modify this curve to fit your specific crossbow and bolt setup by adding additional sight-in distances (truing points).

Recommended Truing Distances

• Minimum: 20 yards + 1 additional distance (for example, 40 yards if space is limited)
• More accurate curve: Up to 4 distances, such as 20, 30, 50, 70 yards or beyond

How to Enter the Truing Menu

• Turn on the scope by pressing the fire button.
• Hold the fire button + up button simultaneously for 3 seconds to enter the menu.
• Use up/down arrows to navigate to the Truing Menu.
• Press the right arrow to select a truing range (SR1, SR2, etc.).

Setting a Truing Point

• Select the desired range (for example, 50 yards).
• Press the fire button to get a range reading and see the aiming LED on the reticle.
• Aim and shoot 2–3 bolts at the target.
• Observe where the bolts group relative to the aiming LED.
• Adjust the LED position up or down to “chase” the arrow group.
• The original LED will flash; the new LED will be solid, indicating your new aiming point.
• Confirm the new setting by pressing the right arrow.

Repeat the process for additional truing points as needed.

Step 6: Exit the Menu and Test

• Press the left arrow multiple times to exit the truing menu.
• Test your ballistics at various distances to ensure accuracy.
• Use additional truing points to refine your ballistic curve if needed.

Tips

• Always use the center crosshair (20-yard pin) to range your target.
• Adjust your aiming pin as recommended by the scope for each distance.
• Regularly test your ballistics with different bolt types and distances for best performance.

Technical Notes

• It is recommended to remove the battery after use to maintain battery life.
• For crossbows exceeding 400 FPS, we recommend using 40, 60, 80, and 100 yards for your truing points. This will help provide the best ballistic curve for your crossbow.

Support

If you have any questions or need further assistance, please visit the Burris Optics Customer Service page:

Burris Optics Customer Service

Additional Resources

For an alternative setup and sight-in video, check out this helpful guide:

Alternative Burris Oracle X Setup Video