Burris Eliminator® 6 — Knowledge Base Article
The Eliminator 6 is Burris’s most advanced all-in-one riflescope, combining premium optics, a built-in laser rangefinder, environmental sensors, and an integrated ballistics computer. Designed for long-range hunters and precision shooters, it delivers instant aiming solutions—eliminating guesswork and reducing setup time in the field.
Overview
The Eliminator 6 integrates ranging, ballistics, and advanced optics into one system, reducing the need for separate laser rangefinders, dope cards, or external ballistic devices in the field.
Key Features
Built-in Laser Rangefinder
- Reflective targets: up to 2,000 yards
- Deer-hide targets: up to 1,400 yards
- Range data is shown in the internal Heads-Up Display (HUD)
Environmental Sensors & Ballistics Engine
- Measures temperature, barometric pressure, and incline angle
- Calculates density altitude using BurrisConnect app profiles
X177 Reticle & Precision Aiming
- 177 micro-LEDs at 1/6 MOA resolution
- Displays holdover dot and 10 mph wind reference bar
- LED aimpoint adjusts automatically for magnification
Custom HUD & Shot Call Indicator (SCI)
- 10 configurable HUD zones: range, wind, energy, etc.
- SCI shows an "X" for unethical shots (low energy/velocity)
Optical & Mechanical Specs
| Specification | Detail |
|---|---|
| Objective Lens | 52 mm |
| Tube Diameter | 34 mm |
| Windage/Elevation | 40 MOA / 40 MOA |
| Click Value | 1/8 MOA |
| Eye Relief | 3.4" to 2.9" |
| Field of View | 30.5' @ 4x, 6.5' @ 20x |
| Weight | ~30 oz |
| Length | 14.6 in. |
| Power | CR123A (scope), CR2032 (remote) |
| Max Range | 2,000 yd (reflective), 1,400 yd (hide) |
| Parallax | Side focus: 25 yds. – infinity |
Setup & Operation
Power & Battery
- CR123A battery for scope; CR2032 for remote
- Do not use rechargeable CR123A batteries
- Remove battery if storing long-term (data remains)
Mounting & Zeroing
- Use 34 mm rings
- Level scope within ±½°
- Zero mechanically before programming ballistics
BurrisConnect App
- Bluetooth pairing for uploading ballistic profiles
- Customize HUD, SCI, and firmware updates
Burris® Eliminator 6 — Remote Switch Guide
Overview
The Eliminator 6 Remote Switch provides wireless activation of the scope’s rangefinder with a non-directional signal and approximately 30 ft (9 m) range. It runs on a single CR2032 coin-cell battery and can be mounted on your rifle stock, worn on a lanyard, or kept in a pocket.
Controls & Parts
- Range / Fire Button — engages the rangefinder.
- CR2032 Battery compartment — under the back cover.
- Re-Pair Button — inside the housing, used to pair the remote to the scope.
Pairing / Re-Pairing
- Remove the screws from the back of the remote and lift the cover.
- Locate the Re-Pair Button inside the housing.
- Press and hold for 5 seconds (or until the HUD on the scope displays PAIRED).
- Reinstall the cover and screws.
Battery Replacement
- Remove the back cover.
- Insert a new CR2032 coin-cell (positive side up).
- Reinstall the cover and screws.
Quick Tips
- If the scope does not respond, verify the remote’s battery orientation and charge.
- Ensure you are within ~30 ft (line-of-sight not required).
- Re-pair the remote after battery changes or if connectivity is intermittent.
Video Walkthroughs
- Connecting and Adjusting Settings
Field Performance
Users report sub-½ MOA aiming error at 1,000 yards, excellent optics, and faster setup compared to using multiple devices.
Comments
0 comments
Article is closed for comments.